I'll bring in the phone number tomorrow. (nm)

Posted by Michaelson from em12-686.utsi.edu on May 09, 1999 at 13:25:03:

In Reply to: Re: Greg, please read this.... posted by Greg on May 08, 1999 at 14:55:37:

: : : : I'd like to change the ribbon on all three of my hats to the narrower version. Can you give me any info on a supplier, along with pricing, locations, etc? Thanks, Steve

: : : Narrower? I agree that the Hyman Hendler ribbon is a tad (about a millimeter) wider than the Catherine Delaney ribbon or the Herbert Johnson non-Petersham variety, but what width are you referring to?

: : : Catherine Delaney has some nice Petersham (raw-edge) ribbon but you have to check the dye for colorfastness before you put it on your hat. I got some and while it is very fine quality ribbon, the dye bled. I sent it to Hatworks in VA. and they did a great job redying it a nice deep brown color. I will probably put this on a future HJ hat, but am happy right now with the HJ seamed-edge ribbon. Catherine Delaney's ribbon is 39mm (which is the correct width), and she will only take an international money order (no credit cards since she is just a small-operation milliner). She can be reached at:

: : : Catherine Delaney
: : : Unit 006 The Chandlery
: : : 50 Westminster Bridge Road
: : : London
: : : SE1 7QY
: : : England

: : : 3 meters of it cost only 4 pounds sterling. Just ask her for the 39 mm darkest brown petersham she has.

: : : Hope this helps!

: : : Greg

: : Karen of the Hatworks needs to contact you, or vice versa, to see if you can provide her with a sample of the petersham ribbon again. She may have access to an overseas distributor, but needs to supply him with a sample. I spoke to her Wednesday and she told me this. Thought I'd pass it along. Regards. Michaelson

: Yeah, sure-no problem-I have a piece of the Delaney ribbon for them. I will dig up their address and mail it to them. Do you have their phone number so I can call them? Thanks!

: Greg

Follow Ups:

Greg, here's the number.... Michaelson 08:20:53 5/10/99 (0)

Post a Followup:

Name:    
E-Mail:  
Subject: 
Comments:

: : : : :      I'd like to change the ribbon on all three of my hats to the narrower version. Can you give me any info on a supplier, along with pricing, locations, etc? Thanks, Steve

: : : : Narrower?  I agree that the Hyman Hendler ribbon is a tad (about a millimeter) wider than the Catherine Delaney ribbon or the Herbert Johnson non-Petersham variety, but what width are you referring to?

: : : : Catherine Delaney has some nice Petersham (raw-edge) ribbon but you have to check the dye for colorfastness before you put it on your hat.  I got some and while it is very fine quality ribbon, the dye bled.  I sent it to Hatworks in VA. and they did a great job redying it a nice deep brown color.  I will probably put this on a future HJ hat, but am happy right now with the HJ seamed-edge ribbon.  Catherine Delaney's ribbon is 39mm (which is the correct width), and she will only take an international money order (no credit cards since she is just a small-operation milliner).  She can be reached at:

: : : : Catherine Delaney
: : : : Unit 006 The Chandlery
: : : : 50 Westminster Bridge Road
: : : : London
: : : : SE1 7QY
: : : : England

: : : : 3 meters of it cost only 4 pounds sterling.  Just ask her for the 39 mm darkest brown petersham she has.

: : : : Hope this helps!

: : : : Greg

: : : Karen of the Hatworks needs to contact you, or vice versa, to see if you can provide her with a sample of the petersham ribbon again. She may have access to an overseas distributor, but needs to supply him with a sample. I spoke to her Wednesday and she told me this. Thought I'd pass it along. Regards. Michaelson

: : Yeah, sure-no problem-I have a piece of the Delaney ribbon for them.  I will dig up their address and mail it to them.  Do you have their phone number so I can call them?  Thanks!

: : Greg

Optional:

Link URL:   
Link Title: 
Image URL:

[ Follow Ups ] [ Post Followup ] [ The Indyfan Forum ] [ FAQ ]